matching plate

英 [ˈmætʃɪŋ pleɪt] 美 [ˈmætʃɪŋ pleɪt]

【电】匹配屏

电力



双语例句

  1. The backing plate shall be welded with matching electrodes so that the weld on the clad side is flush with the backing plate surface.
    底板用配套焊条焊接,使复层侧的焊缝与背衬板表面齐平。
  2. An assembly step matching the shaft shoulder of the mainshaft is positioned on the shaft sleeve and a fixed gap forms between the shaft sleeve step and the water-tight plate.
    轴套上设有与主轴轴肩配置的装配台阶,轴套台阶与水密封板之间形成有固定的间隙。
  3. Floor: Rigid building assembly that divides space horizontally into stories. It forms the bottom of a room. The backing plate shall be welded with matching electrodes so that the weld on the clad side is flush with the backing plate surface.
    地板:刚性的建筑构件,将空间水平划分成楼层。地板构成房间的底部。底板用配套焊条焊接,使复层侧的焊缝与背衬板表面齐平。
  4. Matching mode of North China and Yangtze plates and strain characteristics of the Paleozoic basin in the north edge of the Yangtze plate
    华北与扬子两板块的拼贴方式与扬子北缘古生代盆地应变特征
  5. Application of characteristic area matching method in realizing accurately recognition of motor vehicle license plate
    特征区域模板匹配法实现汽车牌照的精确识别
  6. It is described that the advantages of Static-type dynamic wattless power compensation device based on the main drive SCR power supply matching engineering in Heavy Plate Plant in AISC.
    以鞍钢厚板厂主传动SCR供电配套工程为例.介绍了静止型动态无功功率补尝装置的优点。
  7. Secondly, based on the characteristic that vehicle license plates have plentiful edge information, the method of fuzzy template matching is carried out to locate the vehicle license plate, which has high location ratio.
    利用模糊模板匹配法对牌照区域进行定位,该方法依据牌照区域边缘丰富的特点进行区域搜索,定位准确。
  8. Analysis on the matching performance of thermal expansion valve with plate evaporator
    扩大就业的思路分析板式蒸发器与热力膨胀阀的匹配分析
  9. The consistency of initial flying velocity is assured by increasing the charge mass appropriately, matching the outer diameter of propellant tube and number of tubes reasonably, and maintaining the consistency of thickness of the fixing glue plate.
    适当增加装药质量,合理匹配药管外径和装药根数,保持固药胶胶板厚度一致,可保证飞行初速的一致性。
  10. Design of the Shaped Subreflector with a Matching Top-Plate
    加用匹配顶板的赋形副反射器的设计
  11. Digital mapping and its matching DTP technology hugely improved the development and reforming of map-printing, but traditional plate-making ( plate-basking) technical has not been improved accordingly.
    数据化制图以及与之配套的DTP极大的促进了地图制印的发展和革新,但传统的制版(晒版)工艺并没有得到相应的提高和改善。
  12. At last, this thesis put forward and proved number template matching license plate location method according to he strong noise disturbance of vertical texture radiator condition, because it's hard to decide the threshold, it cannot be applied.
    最后,本文针对垂直纹理散热器噪声干扰严重的情况,提出并验证了号码模板匹配车牌定位的算法,由于该算法匹配度的阈值难以取舍,所以并没有实用价值。
  13. Fast Image Matching of Licence Plate Based on Genetic Algorithm and BP Network
    基于遗传和BP算法的车牌图像快速匹配
  14. Firstly, series of image manipulation are adopted. Then, the fuzzy template matching process is performed. Finally, the exact license plate is extracted correctly from the candidate regions.
    在分析车牌图像的特征后,先利用一系列图像处理,然后进行模糊模板匹配,最后对匹配到的车辆牌照候选区分别加以验证,即得到确切的车辆牌照子图像区域。
  15. The parameters of the wide angled matching dielectric plate and the matching foil over the aperture were determined by theoretical calculations and experimental results are quite close to each other.
    宽角匹配介质板和孔径上匹配膜片的参数是通过理论计算和试验调整确定的。理论计算结果与测量结果相近。
  16. In the energy imitation, making use of the pulse strength controller and narrow pulse pump to carried out the precision control of a pulse strength and the creation time, matching with the high accuracy continuous and adjustable attenuating plate accurately realized the energy magnitude and distribute.
    能量模拟系统中,利用脉冲强度控制器和窄脉冲发生器实现了回波脉冲强度和产生时间的精确控制,配合高精度连续可调衰减装置可准确地实现回波能量大小和分布的仿真。
  17. Under the circumstances of being no training sets, we use the theory of rough sets to construct grey-level matching templates based on the standard characters in vehicle license plate and effectively resolve some defects of bi-level matching templates.
    在无样本训练样本集合的情况下,基于标准车牌字符,利用粗糙集理论生成灰度匹配模板,有效地解决了二值模板在匹配上的一些缺陷。
  18. Base on the mold matching recognition we present a new method of recognizing the number plate.
    本文在模板匹配法的基础上,根据汽车牌照本身的特性,提出了特征点匹配识别的方法。
  19. According to real operating conditions of turbine engine blades in service, a series of combination tests of various load matching and frequency matching for plate specimens was carried out on the compound fatigue testing rig which can simulate operating loads on the blades.
    本文介绍了一种能模拟工作叶片真实载荷环境的复合疲劳试验机,并在此试验机上进行了一系列不同载荷匹配,不同频率匹配的复合疲劳试验研究。
  20. A Fast Matching Method of Car Plate Recognition
    车牌图像的快速匹配识别方法
  21. We develop the special matching for two sides machining of plate tensile sample by research its standard.
    通过对板状试样开肩标准的研究,开发研制了用于板状试样开肩的专用设备。
  22. Application of Static-type Dynamic Wattless Power Compensation to the Main Drive SCR Power Supply Matching Engineering in Heavy Plate Plant in AISC
    静止型动态无功补偿技术在鞍钢厚板厂主传动SCR供电配套工程上的应用
  23. The capacity matching and system's stability are two important aspect for the matching of thermal expansion valve with plate evaporator.
    热力膨胀阀与板式蒸发器的匹配问题包括容量匹配和系统稳定性要求两方面的要求。
  24. The characteristics of plate evolution and movement in China and adjacent areas since Phanerozoic have been studied by using GIS, with a focus on analyzing the matching process of multiple landmasses and the alternating process of the two types of plate movement since Meso-Cenozoic.
    应用地理信息系统,研究了显生宙以来中国及其邻区板块运动演变过程的特征。着重分析了多陆块拼合过程和中、新生代以来两种类型板块运动交替过程。
  25. Different absorbing layers and different matching layers were researched and the findings showed that composition and content of absorbent and addition agent and thickness of plate had a significant influence on absorbing property.
    通过研究不同的吸收层和匹配层的复合平板试样发现,吸波剂和添加剂含量,以及试样厚度对平板的吸波性能影响都很大。
  26. The Optimizing Study on Matching of the Wavy Collecting Plate With the Small-Prickly Discharge Electrode of ESP
    电除尘器波形板与小芒刺线匹配的优化研究
  27. How to solve two problems existing in developing K6 bogie is emphasized, i. e., the primary suspension stiffness of the axle box rubber pad and matching of side frame wear plate and wedge.
    重点介绍了如何解决转K6转向架研制过程中存在的两个问题,即一系橡胶垫定位刚度的选择问题和侧立柱磨耗板与斜楔摩擦副的匹配问题。
  28. Basing on matching of sensitivity of DCG plate with multi spectrum output of an Ar+ laser, one exposure achieves Lippmann color DCG hologram using one laser.
    这种方法在解决了DCG对氩离子激光器的不同光谱输出的感光度相匹配的基础上,实现了用一台激光器一次曝光制作DCG彩色反射全息图。
  29. According to the characteristics of license plate character, this paper use the improved Hausdorff distance template matching algorithm to realize license plate character recognition.
    根据车牌字符的特点,论文采用改进的Hausdorff距离多模板匹配算法对车牌字符进行识别。